Call Us
+86-18958666691 / +86-18958672978
+86-18958666689 / +86-18958672978
Send Us
Address
Panao Industrial Zone, Daxi Town,Wenling City,China
 |
| Quantity: | |
|---|---|
WQ type sewage and sewage submersible electric pump consists of three parts: water pump, seal and electric motor. The electric motor is located on the upper part of the electric pump and is a single-phase or three-phase asynchronous motor; The double-end mechanical seal is used between the motor and the motor, and the "O"-shaped oil-resistant rubber sealing ring is used as a static seal at each fixed seal. According to customer requirements, it can be equipped with a stirring device, which generates a strong stirring force with the rotation of the motor shaft, and stirs the sediment in the sewage pool into suspended matter and then removes it.
The pump motor is manufactured by the advanced technology with high-efficiency non-standard design, reliable operation and low cost introduced from abroad. The motor shell is made of high-quality stainless steel, and the motor is self-cooled by water. When the pump is working, the motor part can be exposed to the water surface for long-term operation, which avoids that only a small part of the motor is allowed to run when the domestic sewage pump is working, otherwise it will cause the motor to burn out. fatal problem. Unique pump part design: The channel-type impeller has the characteristics of high efficiency and no blockage, and the maximum particle diameter can reach 100mm.
Conditions Of Use
This series of electric pumps are self-developed products with low consumption and energy saving. They are widely used in industry, agriculture, construction, municipal environmental protection and other places. They can pump liquids containing short fibers, paper scraps, sediment and other solid particles, such as mud. It is an ideal water conservancy equipment for agricultural irrigation and drainage and dredging of rivers and ponds, but it is not suitable for use in environments with explosion-proof requirements.
1. The temperature of the medium does not exceed +40°C
2. The PH value of the medium is between 4-10
3. The maximum density of the medium is 1050kg/m
4. The power frequency is 50Hz, and the voltage fluctuation range is 0.9-1.1 times the rated value
5. The diving depth does not exceed 5m
WQ type sewage and sewage submersible electric pump consists of three parts: water pump, seal and electric motor. The electric motor is located on the upper part of the electric pump and is a single-phase or three-phase asynchronous motor; The double-end mechanical seal is used between the motor and the motor, and the "O"-shaped oil-resistant rubber sealing ring is used as a static seal at each fixed seal. According to customer requirements, it can be equipped with a stirring device, which generates a strong stirring force with the rotation of the motor shaft, and stirs the sediment in the sewage pool into suspended matter and then removes it.
The pump motor is manufactured by the advanced technology with high-efficiency non-standard design, reliable operation and low cost introduced from abroad. The motor shell is made of high-quality stainless steel, and the motor is self-cooled by water. When the pump is working, the motor part can be exposed to the water surface for long-term operation, which avoids that only a small part of the motor is allowed to run when the domestic sewage pump is working, otherwise it will cause the motor to burn out. fatal problem. Unique pump part design: The channel-type impeller has the characteristics of high efficiency and no blockage, and the maximum particle diameter can reach 100mm.
Conditions Of Use
This series of electric pumps are self-developed products with low consumption and energy saving. They are widely used in industry, agriculture, construction, municipal environmental protection and other places. They can pump liquids containing short fibers, paper scraps, sediment and other solid particles, such as mud. It is an ideal water conservancy equipment for agricultural irrigation and drainage and dredging of rivers and ponds, but it is not suitable for use in environments with explosion-proof requirements.
1. The temperature of the medium does not exceed +40°C
2. The PH value of the medium is between 4-10
3. The maximum density of the medium is 1050kg/m
4. The power frequency is 50Hz, and the voltage fluctuation range is 0.9-1.1 times the rated value
5. The diving depth does not exceed 5m
